While you need a printout immediately & your Brother printer shows “print unable 70” message on the screen.
Really this situation is worst to imagine.
Everyone shares the same feeling for this problem, But there is no other way to solve this problem,
you need to do these easy steps at your own or take help from our Brother printer experts’.
This article will explain all tried and tested steps to get rid of this problem. Do all steps carefully to fix the brother printer error code 70.
Easy Steps To Fix Brother Printer Error Code 70
Step1: Reset The Printer
The first thing you should do when you get to see the message ‘Print Unable 70’ or ‘Machine Error 70’ is to reset your printer. A power-recycle will allow you to reset your printer in no time. Do the following:
- turn the printer off.
- Take out the power cable from the socket.
- Open the printer covers to release the heat.
- Wait for 10 minutes; give a complete rest.
- Close the printer’s covers.
- Insert the power cable and turn it On
If you see ‘Ready’ on brother printer display; that means the issue has been resolved. You are now good to go for giving the print commands. In case the Error code 70 is still appearing; you can try the next step.
Step2: Inspect Fuser Roller
As mentioned earlier, any paper jam between the fuser rollers can also result in showing the message ‘Print Unable 70’ or ‘Machine Error 70’ on brother printer. To inspect the rollers, do the following:
Turn off the printer and open the back cover
- Pull out the green tabs to wrap down the fuser cover.
- Look deep inside to check if there is any paper or paper piece stuck between fuser rollers.
- Remove any such stuck paper. Pull gently to pull out the stuck paper.
- Close the fuser cover and the back cover.
Turn on your printer to see if the brother printer keeps going offline and showing error code 70. If yes, then move further to try the next troubleshooting step.
If your printer display shows “Ready” then the issue is fixed, and you can now print.
Step3: Check for Printer Paper Jam
If there is no paper jam or any issues with the fuser rollers, then do some other checks. There is a possibility of a paper jam under the drum unit as well. To check do the following:
- Turn off your printer.
- Pull the front cover release buttons and open the front cover.
- Let the printer cool for at least 10-15 minutes.
- The internal parts of the printer become very hot during its working. Be careful before you put your hand inside the printer.
- Pull out the drum unit gently by holding the handle on it.
- Place it aside safely on a clean paper or cloth.
- Check inside the printer if there is any paper stuck.
- If there is any paper stuck; pull it out gently by holding from both sides.
- Now, slide back the drum unit at its place inside the printer.
- Make sure you place it accurately inside the printer.
- Turn the lock levers properly to secure the drum in its place.
- Close the front cover of the printer.
- Turn on the printer.
Check the printer display for its status; if it says “Ready” that means it’s ready to do printing jobs.
If you still see the Brother Printer Error Code 70, then you better contact our experts. There might be some hardware malfunctioning, and it is not a cup of tea to handle.
At The End
For any further help, you can contact us. Our team of expert can resolve all printer issues for you.
Disclaimer: Printer Offline Tech, is a third-party service provider and have no affiliation or relation with the brand or service. Any image or content used in the post is only for representation and information purposes and we do not have any right or authority over it. How are you using this information is solely your responsibility and we shall not be held accountable for the same.