How to Resolve Brother Printer in Error State Windows 10?

This post is dedicated to the discussion about resolving “Brother Printer in Error State” Windows 10. We have tried to explain all tried and tested solutions. 

Did you recently updated your windows 10? or upgraded your system to windows 10 from some lower version? Whenever you make some changes in your system; it is common for your system to struggle while recognizing the current settings. Recognizing the attached printer, scanner, external hard drive, or not connecting to wi-fi network are some common problems that you may also encounter.

Keep trying these solutions until your brother printer comes out of error state.

Let’s start rolling the ball!!

Solution#1: Reboot Your Brother Printer

Your computer will automatically be rebooted once you will update your windows. To make your PC work with brother printer; restart your printer as well.

Restarting your printer will benefit you in the following ways:

• It will give a rest to the printer.
• Windows can recognize the attached printer.
• Both printer and windows 10 can settle their settings to work with each other.

If you need detailed instructions on how to reboot your printer, click here for the same.

Solution #2: Use the Parallel Port

If rebooting your printer didn’t work then fasten your belts to work out with some technical settings. Try to use a parallel port; when you get your brother printer in error state in windows 10.

 It becomes difficult for windows to detect the attached printer; especially after windows upgrade. Do the following:

• Go to the “Device Manager.”
• Locate the parallel port
• Double-click on the parallel port.
• A new properties menu will pop-up.
• Choose the appropriate port settings options.

While choosing options, consider your system configurations as well. You should better seek a piece of expert advice on this.

Solution#3: Connect Printer Via Ethernet Cable

This solution is valid when you are using your brother printer wirelessly with your Windows 10 PC. Cable connections are always more reliable and secure in comparison to the wireless connections. 

This rule also works here, use an ethernet cable to connect your printer and the computer.

Once you connect the ethernet cable to both the devices; you may need to add your printer to your system again.

Go to “Printers & Scanners” in “Control Panel” to add your printer.

Need more help on how to set up brother printer on windows? 

Check if the “Printer in Error State” messages go away from the display. If not, move on trying the next step.

Solution#4: Check and Re-connect to WiFi Network

The next thing you can try is to re-connect your Brother printer to the wi-fi network. Your printer and windows system needs to be connected to the same wi-fi network.

While you still see the message “Printer in Error State”; you should remove and add a wi-fi network from scratch to your printer. Do the following:

• Restart all wi-fi network devices including the modem and the router.
• Go to the printer and connect it to the wi-fi network.
• Click on the main settings on your printers and then the “Wi-Fi network” settings.
• Click to select your wi-fi network name; provide the correct login details.
• After a little while, your printer will get connected to the wi-fi network.

Again it’s time to see if the error state message is gone away or not? Hopefully, you won’t see that error state message on your printer now. Unfortunately, if you still see it; its high time, you should contact our experts.

Some other troubleshooting tricks that you can try to fix “Brother Printer in Error State”:

• Check if the printer is turned on.
• Check if the printer is connected to the wi-fi network.
• Check for any connection restrictions.
• Update Printer drivers.
• Run Printer troubleshooter on Windows PC.
• Check and clear any paper jam.
• Check if the printer cover is not open.

Still struggling with Brother Printer Offline due to error state? Don’t waste more time to talk to experts.

Disclaimer: Printer Offline Tech, is a third-party service provider and have no affiliation or relation with the brand or service. Any image or content used in the post is only for representation and information purposes and we do not have any right or authority over it. How are you using this information is solely your responsibility and we shall not be held accountable for the same.